Topics:

• Instructions to install remote blower part number 801642
• Roof mount and wall mount instructions for installation
• How to install Wolf 1200 CFM remote blower
• Previous blower part number CTBLOWER120REM
• Static pressure charts for hoods with 801642 blower

Answer:

1200 CFM Remote Blower Installation Instructions detail the installation process.

• The 1200 CFM remote blower draws 120 volts and 3.0 amps and is an infinite speed control blower (not low, medium, high).
• Use 10" round diameter rigid duct to connect the hood to the blower.
• The 1200 CFM remote blower is to not be installed underneath an eave. It must be installed on a pitched roof or a vertical exterior side wall.
  • The blower will not operate properly when installed horizontally (underneath an eave). See also, Remote Blower Installed on Side or Upside Down.
• The dimensions of the blower housing are 18" x 20-1/2" x 10-1/8".
  • Depth is 10-1/8". The blower housing can rotate, so 18" or 20-1/2" can be width or length depending on installation.
  • Shipping dimensions: 14-1/2" x 26-1/4" x 36".
  • Shipping weight: 38-1/2 lb.
• The blower box is made of 3003 aluminum.
• Photo of the remote blower housing:

• The blower can be painted, refer to Painting a Remote Blower for more information.
• See also, Remote Blower Minimum Ground Clearance.
• Refer to the Blower Motor Compatibility Chart for more information.
• For static pressure information, contact the Wolf Customer Care Team at [email protected], or call (800) 222-7820, Monday-Friday, 8:00 a.m. - 5:00 p.m. CST.