500 and 600 Series Grille Removal and Installation

Core Issue:

  • How to remove the grille on a 500 or 600 Series product

Answer:

Framed and Stainless Steel Louvered Grilles
  1. Grille screws are accessed with door(s) open.
  2. With the door(s) open, look up at the bottom side of the grille.
  3. Remove the grille screws going up into the bottom of the grille.
  4. Tilt the grille forward at the top and release the springs from behind the grille, then lift it off.
  5. Remove curved hook from the base of the screw that attaches the spring to the grille.
  6. Reverse steps to install.

Overlay Panel Grille

  1. Overlay grille is hooked into the frame using mounting brackets.
  2. No tools are required to remove the grille.
  3. To remove, lift straight up, then pull the bottom edge of the grille out, then down to release from its mounting bracket.
  4. Reverse steps to install.

Models 601R, 601RG and 601F, 501R or 501F Louvered Grille

  1. Remove the two black screws in the lowest louver in the grille.
  2. Tilt the bottom of the grille out and away. It will release from the
    top of the grille.
  3. Reverse steps to install.

Model 601RG Stainless Steel Grille

  1. Remove in a similar fashion as the overlay panel grille.
See Also:

Thank you for your request. A Customer Care representative will contact you.

An error occurred. We were unable to submit your request.

Related Questions

/-/media/images/united-states/creative/frame_customerservice.jpg

GET EXPERT SUPPORT, 24/7

Whether you’re shopping for appliances or have questions about those you already own, we’ve got the resources you need. Talk direct to a customer care expert at the Sub-Zero and Wolf service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

Toll-free (800) 222-7820

Customer Care and Support