700 Series Light Bulbs

Core Issue:

  • Where to purchase replacement light bulbs for 700 Series
  • How long do light bulbs last?
  • What size is the light bulb?
  • Can blue or LED light bulbs be used as a replacement bulbs in older models?
  • How to replace light bulbs for 700 Integrated units

Steps to Verify Issue:

Cabinet lighting for 700 Series Tall upper compartment and Column models use standard 40-watt appliance bulbs.

  • Freezer drawers and all Drawer models use standard 25-watt appliance bulbs.
  • LED lights are not available for 700 Series units, and should not be used to replace either the 40-watt or 25-watt appliance bulbs.
  • Standard appliance bulbs can be used in place of the blue tinted bulbs.
  • Alternate bulbs need a T10, medium base, 40-watt appliance bulb.
  • Standard 40-watt appliance bulbs that fit these specifications tend to be yellowish.
  • If new light bulbs do not illuminate, or only work intermittently, a new light switch may be needed.
  • See also:

To replace the light bulbs:

  1. Place hands under the light shield and release the two clips on the back.
  2. Lift up and slide back slowly until the key slots on the side of the light shield drop past the mounting studs in the side walls.
  3. Remove the light shield. The bulbs are now accessible.
  4. Replace the bulbs and reposition the light shield.

Each drawer compartment has a standard 25-watt appliance bulb recessed into the top of the compartment. Drawer lighting uses a standard 25-watt appliance bulb recessed into the top of the compartment. To replace the light bulb:

  1. Pull the drawer out to its full extension or remove the drawer completely.
  2. Replace the bulb and follow the reverse steps to reinstall the drawer.

Crisper drawer lighting for model IC-27R is located behind the upper crisper drawer and mounted to the back wall of the refrigerator. To remove the light shield:

  1. Remove the crisper drawer.
  2. Remove the upper crisper shelf.
  3. Place both hands under the bottom right and left sides of the light shield and push upward.

Replacing the halogen light bulb in early model 700 Tall units, prior to serial (PTS) 1755730, required removing the control panel.

  1. Grasp the edges of the control panel and pull down. Two tabs on each corner will release, enabling the panel to drop down.
  2. Using a soft cloth or wearing protective gloves, grasp the bulb firmly and pull straight up.
  3. Reverse steps to replace the control panel.

Answer:

The replacement light bulb needed varies by model and serial number. Use the table to determine which bulb to use:

UnitUpper Compartment
Bulb Part Number
(# of bulbs)
Upper Drawer
Bulb Part Number
(# of bulbs)
Lower Drawer
Bulb Part Number
(# of bulbs)
700TC(I)/TF(I)/TR
Prior to Serial (PTS) 1755730
7021080 (4)7016030 (1)7016030 (1)
700BR/BF(I)
PTS 1755730
(0)7016030 (1)7016030 (1)
700TCI/TR/TF(I)-2,-3
PTS 3151471
7014658 (4)7014674 (1)7014674 (1)
700TC/TR/TF(I)-2,-3
Starting with Serial (SWS) 3151471
7006999 (2)7019206 (1)7019206 (1)
700BR/BF(I)/BC(I)-2,-3
PTS 3151471
(0)7014674 (1)7014674 (1)
700BR/BF(I)/BC(I)-2,-3
SWS 3151471
(0)7019206 (1)7019206 (1)
736TR/TC(I)/TF(I)
PTS 2974500
7014658 (4)7014674 (1)7014674 (1)
736TR/TC(I)/TF(I)
SWS 2974500
7006999 (2)7019206 (1)7019206 (1)


Contact a Factory Certified Parts Distributor to order parts. Refer to the product use and care guide for further information.

Thank you for your request. A Customer Care representative will contact you.

An error occurred. We were unable to submit your request.

Related Questions

/-/media/images/united-states/creative/frame_customerservice.jpg

GET EXPERT SUPPORT, 24/7

Whether you’re shopping for appliances or have questions about those you already own, we’ve got the resources you need. Talk direct to a customer care expert at the Sub-Zero and Wolf service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

Toll-free (800) 222-7820

Customer Care and Support