Skip to main content
E-mail This Answer

Wolf Ceiling-Mounted Hood Control Panel Filter Light

Topics:

  • Ceiling-Mounted Hood control panel filter light
  • Filter light illuminated or solid on VC Series Ceiling-Mounted Hood
  • Filter light flashing or blinking on VC Series ventilation hood
  • How to clear filter light on Ceiling-Mounted Hood

Cause:

  • Grease filters need to be cleaned
  • Charcoal filter needs to be replaced

Troubleshooting:

    Answer:

    The Ceiling-Mounted Ventilation Hood is equipped with a filter cleaning status light to remind product owners to clean the unit's grease filters and replace the charcoal filters:

    Grease Filter Light

    After 100 hours of blower operation, the filter status light will illuminate. This indicates the grease filters should be removed and cleaned.

    To reset the filter status light:

    1. Verify the hood lights and blower are turned off.
    2. Press and hold the "3" key for 5 seconds.

    This status light is standard and cannot be disabled.

    Charcoal Filter Light

    After 200 hours of blower operation, the filter status light will flash every 2 seconds. This indicates the charcoal filters should be replaced, and the grease filters should be removed and cleaned.

    To reset the filter status light:

    1. Verify the hood lights and blower are turned off.
    2. Press and hold the "3" key for 5 seconds.

    The charcoal filter status light is an option and can be enabled/disabled as desired. To enable or disable the charcoal filter status light:

    1. Verify the hood lights and blower are turned off.
    2. Press and hold the "2" key for 5 seconds.
      • If the LED flashes two times, the charcoal filter status light is enabled.
      • If the LED flashes one time, the charcoal filter status light is disabled.

    Note: It is not possible to reset the filter status light from the remote.

    For additional information, see:

    Related Questions

    DID THIS ANSWER YOUR QUESTION?

    Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

    Ask Your Question

    We're standing by with answers

    Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

     

    Call us at (800) 222-7820