Skip to main content

Wolf Convection Microwave E Series Trim Kit

Topics:

  • Installation instructions for part 809960, 811066, 817993, 820037, 828020, 828021, 829306 for Convection Microwaves
  • Instruction sheet 815099, 818126, 822966; list of components included
  • Height of an MC24 or MWC24 E Series trim kit
  • Is the black glass (polycarbonate) trim or stainless trim from the kit available separately?
  • Differences between E Series and L Series trim kits
  • What is the foam tape used for? What are the foam tape measurements?
  • Where are the polycarbonate pieces packaged?

Answer:

MC24 and MWC24 E Series Trim Kit Installation Instructions includes a list of components included with the kit.

  • If missing, the following screws can be ordered individually:
    • PN 809765 - ​#6-18 x 1". Part is qty 1. Order 6 if needed.
    • PN 6200080 - #8-15 x 1/2" Part is qty 1. Order 2 if needed.

Convection Microwave Trim Kit Notes

  • For cabinet cutout opening dimensions for installing a microwave with a trim kit, use Reveal.
  • Other than width, the only differences between E and L Series Microwave trim kits are cosmetic. Each style is meant to match up with the trim and finish on the corresponding oven series.
    • The L Series trim is designed to match the L Series Oven for a traditional look.
    • The E Series trim is designed to match the E Series Oven for a contemporary look.
  • There is no difference between trim kits for different aged microwaves. For example, a trim kit from 2004 fits a new unit and vice versa.
  • Convection Microwave oven trim kits that match E Series Ovens are available in 27" and 30" finished widths.
  • The trim kits are for use on models MC24 or MWC24.
  • Refer to the E Series Trim Kit Accessory Webpage for product information and pictures.
  • Convection Microwave oven trim kits will not fit a Standard Microwave. See Standard Microwave E Series Trim Kit for more information.

Installation Notes

  • For cabinet cutout opening dimensions for installing a microwave with a trim kit, use Reveal.
  • The foam tape included in the trim kit attaches to the back side of the frame assembly and is compressed between the frame assembly and the face of the cabinetry.
    • The foam tape helps fill gaps and protect cabinetry.
    • If additional foam tape is needed, purchase it locally at any retail, hardware, or home improvement store.
    • The foam tape may not be listed as a component or explained on the instruction sheet.
    • The foam tape kit includes four pieces of foam.
      • Two pieces measure 3/8" x 1" x 27".
      • Two pieces measure 3/8" x 1/2" x 18".
      • The foam tape is not available as a separate part and cannot be purchased from any of our parts distributors.
    • Failure to use the foam tape will not affect unit performance, overall installation, or warranty.
  • Polycarbonate pieces are on the underside of the sheet metal in the box.
  • Polycarbonate pieces are attached with magnets.
  • Refer to the Wolf Design Guide for additional design specifications and opening dimensions.
  • See also, E Series Microwave Trim Kit Flush Inset Installation.

Trim kit part numbers and some replacement parts are in the table below.

Genuine Sub-Zero, Wolf, and Cove parts are available by calling the Factory Certified Parts Distributor in your area. Only filters and cleaners are available for online purchase in the Sub-Zero, Wolf, and Cove Store. Other parts are not available for purchase online. Use Locator to find the Parts Distributor for your area.

Trim Kit SizeTrim Kit DimensionsFinishPart #Polycarbonate (Glass) Trim
Replacement Part #
MWC 30"19-7/8" high X 29-7/8" wide30" stainless steel

811066

Order part number 817616, which includes:
  • 2 small polycarbonate trim pieces (1/2" wide)
  • 2 large polycarbonate trim pieces (1-13/16" wide)
  • 2 stainless steel trim pieces (1-5/16" wide)
  • 2 mounting brackets
  • 2 bracket shims
  • Magnetic tape
  • *Trim kit 829306 will support both E Series Transitional and M Series Stainless Steel applications.

MC 30"

19-7/8" high X 29-7/8" wide30" stainless steel

829306*
(new)

828020
(former)

MC 30"19-7/8" high X 29-7/8" wide30" black glass

828021 (new)

  • Individual polycarbonate or stainless steel trim pieces are not available separately.
  • Order an entire trim kit to replace any missing or damaged polycarbonate or stainless steel trim pieces.
MC, MWC 27"19-7/8" high X 26-7/8" wide27" stainless steel809960

Order part number 817616, which includes:

  • 2 small polycarbonate trim pieces (1/2" wide)
  • 2 large polycarbonate trim pieces (1-13/16" wide)
  • 2 stainless steel trim pieces (1-5/16" wide)
  • 2 mounting brackets
  • 2 bracket shims
  • Magnetic tape
MC, MWC 27"19-7/8" high X 26-7/8" wide27" black glass820037

 

 

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820