Skip to main content

648PRO, PRO3650, and PRO4850 90° Door Stop Troubleshooting

Topics:

  • How to install the 90° door stop on a 648PRO, PRO3650, and PRO4850 model
  • Part number 0000046
  • Instruction sheet 3758687
  • How to install the 90-degree door stop on a 648PRO?
  • How to stop the door from opening past 90° on a PRO 36 and PRO 48
  • 90 degree door stop does not work

Answer:

Troubleshooting Scenarios

  • The pins that shipped with the unit are stuck in the hinges and will not come out.
    • Sometimes the weight of the door causes the pins to fit very snugly inside the hinge.
    • Use pliers to grip the pin and remove it from the hinge.
  • The 90 degree pins are installed, but the door will not fit back onto the hinges.
    • The pins have a notch on them that allows the 90 degree door rotation.
    • If the notches in the top hinge pin and the bottom hinge pin are not aligned in the same direction, the door will not fit.
    • Try turning the pins to they are in the same orientation as one another.
  • The 90 degree pins are installed, but the door is not stopping at 90 degrees.
    • If the notch in the pin is a quarter turn off, the door will not stop at the proper point.
    • Try removing the pins and turning them one-quarter turn (making sure the pins are in the same orientation as one another) until the door stops at 90 degrees.
  • How is the 90 degree pin visually different from the standard pin?
    • Look at the end of the pin.
    • The 90 degree pin has a brass tip on the end and the standard one does not.
  • See also:

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820