Skip to main content

700 Series Integrated Refrigeration Design Guide

Topics:

  • Panel weight limit, panel dimensions, opening dimensions, handle depth
  • Hinge full-scale templates to help with corner installations and clearance to products near the unit, door clearance, and overall dimensions
  • Side panel dimensions
  • Illustrations for dual installation including filler strip information
  • Can a dimension different that suggested in the Sub-Zero Design Guide be used?

Answer:

Refer to the 700 Series Designer Refrigeration Design Guide for design specifications.

Note: Sub-Zero does not recommend or approve of any changes to any design or installation specification published within the Design Guide. When installing Wolf products with Sub-Zero products, all specifications are tested and approved for use using the Sub-Zero Design Guide and Wolf Design Guide only. Using alternate dimensions, materials, methods, or anything else other than published specifications may lead to product damage, negative performance, or inspection approval issues.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820