Classic (Formerly Built-In) Condenser Cleaning

Topics:

  • Classic (formerly Built-In) condenser cleaning

Steps to Verify Issue:

CAUTION:

Before cleaning the condenser, turn off power at the control panel. Wear gloves to avoid injury from sharp condenser fins.

  1. The condenser is behind the flip-up grille. To access, pull out on the bottom edge of the grille and rotate upward.
  2. Use a soft bristle brush and vacuum to remove dust and lint from the condenser.
  3. Clean the condenser every three to six months. Refer to the illustration below.

IMPORTANT NOTE:

To avoid damaging the condenser fins, vacuum in the direction of the fins.

CAUTION:

Failure to clean the condenser could result in temperature loss, mechanical failure, or damage.

Answer:

Refer to the product Use and Care Guide for further information.

Thank you for your request. A Customer Care representative will contact you.

An error occurred. We were unable to submit your request.

Related Questions

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

Call us at (800) 222-7820

Customer Care and Support