Skip to main content

Cove Dishwasher Cycle Options

Topics:

  • Cove Dishwasher cycle options Delay Start, High Temp Wash, Sani Rinse, Extended Dry, Extra Dry, Top Racks Only
  • What are the options for cycles on the Cove Dishwasher?
  • Customize wash cycle

Troubleshooting:

Setting cycle options:

  1. Select the desired wash cycle. See Cove Dishwasher Wash Cycles.
  2. Touch Options.
  3. Touch Options multiple times to scroll through cycle options.
  4. Touch Enter to select the desired option and continue to touch Enter until the desired setting appears on the display.
  5. Touch Options again to select additional options.
  6. Touch Start and close the door within 4 seconds.
    • For most options, the dishwasher will remember the options selected from the last time a specific cycle was completed. 
      • For example, a Quick Wash cycle is completed with High Temp Wash and Extended Dry options selected.
      • The next time Quick Wash is selected, the High Temp Wash and Extended Dry options are automatically selected.
      • Manually change the cycle options before starting the dishwasher, if different cycle options are desired.
    • The Delay Start or Top Racks Only options are not saved. These options must be selected each time.
    • Options are only saved for cycles that were run to completion. 

Answer:

Cycle OptionsDescription

Delay Start

Delays start of wash cycle by 1–12 hours in 1-hour increments.

High Temp Wash

Increases the main wash water temperature and extends the cycle time by 10 minutes.

Sani Rinse*

Increases the rinse water temperature and extends the rinse time.

Extended Dry

Extends the dry time by 30 minutes.

Extra Dry

Increases the rinse water temperature and extends the dry time by 30 minutes.

Top Racks Only

Directs wash functions to upper and middle racks only.

*Sanitizes per NSF/ANSI standard 184 for residential dishwashers.

Refer to the product Use and Care Guide for further information.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820