Skip to main content

Cove Dishwasher User Setup and Setting Adjustment

Topics:

  • Cove Dishwasher user setup
  • Adjust or change language, water hardness, loudness, brightness, or display settings

Troubleshooting:

Setting user options:

  1. Touch Cancel twice.
  2. Touch and hold Options for approximately ten seconds until “User Set Up” appears on the display.
  3. Touch Options multiple times to scroll to the desired option. Refer to the table below for a complete list.
  4. Touch Enter to scroll or to select the desired setting.
  5. Touch Cancel to exit user setup.

If the unit has been set to an unfamiliar language, try using a translation program like Google Translate to navigate menus.

Answer:

The user setup feature allows the user to select preferences as listed in the chart below.

User optionsDescription

Language

Select language.

Water Hardness

Adjust water hardness setting. *Water Softener Models Only*

Connect?

Refer to Cove Connected Appliance Use.

Tone Level

Adjust tone level.

Notification

Turn end-of-cycle chime to off, low, or high. If set to off, the green end-of-cycle status light is also disabled.

Scroll Rate

Adjust display scroll rate.

Display Contrast

Adjust display contrast.

Display Brightness

Adjust display brightness.

Floor Light

Adjust status light brightness.

Rinse Aid Dosing

Adjust amount of rinse aid dispensed.

Showroom Mode

For showroom use only.

Reset All

Restore factory settings.

Refer to the product Use and Care Guide for further information.

See also:

DID THIS ANSWER YOUR QUESTION?

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820