Skip to main content

Sub-Zero Crisper Glass Assembly Seal Replacement

Topics:

  • Are front and rear seals included with new crisper glass assemblies?
  • Can just the front and rear seal be replaced on the crisper glass assembly?
  • How to replace the front and rear seal on the crisper glass assembly
  • When replacing a crisper carriage assembly, is it necessary to reapply silicone along the edge?
  • What direction should the crisper glass assembly be installed, smooth side up or down?

Troubleshooting:

To replace the front and rear seals:

  1. Pull or slide the old seals off and replace with the new seals.
  2. Apply a bead of silicone along the edge of the seal.

Answer:

Front and rear seals are included with a new crisper glass assembly. Crisper glass assembly installation varies depending on model number:

  • 500 Series
    • The smooth side is on the bottom.
    • The pegs on the bottom of the crisper glass assembly face downwards and insert into the notches on the crisper drawer slides.
  • 600 Series
    • The smooth side is on the top.
    • The pegs on the bottom of the crisper glass assembly face downwards and insert into the notches on the crisper supports.
  • Classic (BI) Series
    • The smooth side is on the top.
    • The crisper glass assembly has notches on the bottom that are inserted over the pegs sticking out of the left and right side wall of the unit.
    • To remove crisper glass cover for BI-36/42/48, the one between the drawers: Lift the cover and pull it straight out. Or, gently press down on bottom retainer tabs on either side while pulling cover straight out.
  • IC-27 Series
    • The smooth side is on the top.
    • The crisper glass assembly has notches on the bottom that are inserted over the pegs sticking out of the left and right side wall of the unit.

Contact a Factory Certified Parts Distributor to order parts or Factory Certified Service to schedule an appointment for repair.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820