Skip to main content

Sub-Zero Dispenser Ice Bin Installation Issues

Topics:

  • How to install the ice bin on a dispenser model
  • Dispenser ice bin will not install properly
  • Dispenser ice bin sticking out, will not push all the way back

Troubleshooting:

  1. Remove ice bin from unit.
  2. Make sure ice bin is not broken or damaged. Replace if broken or damaged.
  3. Inspect path of bucket, rails, and dispenser chute flap are free of any obstruction.
  4. Turn auger motor 1/4 turn to verify teeth of motor are aligned properly with bucket auger.
  5. Make sure ice maker leveling arm is not blocking the ice bin.
  6. Refer to Sub-Zero Side-by-Side Model Ice Bin Installation for more information, including a video.

If these steps do not resolve the issue, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820