Topics:

• How to resolve LO showing in an Integrated Fryer Module
• Fryer displays LO during use
• LO error code

Cause:

• No oil in the pan
• Excessive sediment on the bottom of the fryer pan
• RTD error

Troubleshooting:

1. Drain and clean the basin if there is excessive sediment in the oil.

   • See IF15 Fryer Module Drain and Clean Basin.
2. Ensure the oil is at the proper level. Add clean oil if necessary.
3. If using lard, refer to Use Lard in a Fryer Module.
4. Press CLEAR to reset the control.
5. Wait two minutes before restarting the unit.

Refer to the product use and care guide for further information.

Answer:

If these steps do not resolve the issue, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.