- Grease tray on Dual Fuel (DF) Range, GR Series Gas Range, or Sealed Burner Rangetop (SRT) does not fit under entire griddle
- Griddle grease tray moves
- Griddle grease tray capture area
Steps to Verify Issue:
- If the finish is worn or comes off, replace the tray. The tray should not be painted.
- Tray should be cleaned by hand in the sink using a mild detergent. Tray is not dishwasher safe.
- If the grease capture overflow is an issue, a new style griddle can improve the grease path and capture area. See New Wolf Griddle for details.
- Factory Certified Service is needed to change the griddle style.
- The area underneath the grease tray is solid and can be wiped out if grease does overflow.
- See also:
There is not a tight fit between the griddle and the grease tray; this is normal and allows for easy removal and installation of the grease tray.
- To remove, tilt front of grease tray up and pull out.
- The tray has a black matte enamel finish.
- R Series Gas Range and RT Series Rangetop grease trays are accessed by pulling out the drip tray.
- See also, Clean a Griddle.
|DF, GR, and SRT||Single Griddle Grease Tray||816281|
|Double Griddle Grease Tray||816544|
|R and RT Series||Grease Tray||814142|
|Grease Tray with Dimples||816431|
DID THIS ANSWER YOUR QUESTION?
Thank you for your request. A Customer Care representative will contact you.
An error occurred. We were unable to submit your request.
We're standing by with answers
Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.
Call us at (800) 222-7820