Pro Low-Profile Wall Hood Discharge and Transition

Topics:

  • Adjust Low Profile Pro Wall Hood from vertical to horizontal discharge
  • Install horizontal discharge on Low Profile Pro Hood
  • Change air deflector on Pro Low Profile Wall Hood
  • Is an accessory needed to discharge horizontally?
  • Is a transition or damper supplied with the Pro Low Profile Wall Hood?
  • Do Low Profile Wall Hoods come with a transition?
  • Does the Pro Low Profile Wall Hood transition ship inside the hood?
  • Part numbers 811194 and 804705

Steps to Verify Issue:

To adjust from a vertical to a horizontal discharge:

In-line or Remote Blower

  1. Remove the block-off plate from back panel of the hood.
  2. Remove the damper mounting plate from the top of the hood.
  3. Install the removed block-off plate to cover the discharge cutout on top of the hood.
  4. Install the removed damper mounting plate on the back panel of the hood.
  5. Connect the hood to ventilation ductwork.

Internal Blower

  • The 500 CFM internal blower, part number 810991, is available for the PW302210 and PW362210 only.
    • This blower includes a 3 1/4" x 10" rectangle damper.
    • The installation guide shows this damper in a diagram for the internal blower. Damper does not come with the hood. It only comes with the blower.
    • This transition with damper is available separately if a replacement is necessary. Refer to 500 CFM Internal Blower (Part #810991) Replacement Transition for more information.
  • An internal blower option is not available for the PW422210 or PW482210; refer to in-line or remote blower instructions above.
    • This blower motor will fit in all 22" deep Pro Hoods, including PW422210 and PW482210. However, Wolf suggests a larger CFM blower for these hood sizes.
  1. Install the blower and blower mounting plate per blower's provided instructions.
  2. Connect the hood to ventilation ductwork.

Answer:

PW Low Profile hoods (PWxx2210 models) are adjustable for vertical or horizontal discharge.

  • A transition or damper does not come with Pro Low Profile Wall Hoods.
  • Pro Low Profile Wall Hoods have a 3-1/4" x 14" discharge cut-out on the hood.
  • Accessory transitions are 9" tall.
  • The hood is prepared for a vertical discharge out of the box.
Hood Discharge Cutout SizeTransition SizeFor Use WithPart Number
3-1/4" x 14"9" x 21" to 8" roundAll Models804705
3-1/4" x 14"9" x 21" to 10" roundAll Models811194

Genuine Sub-Zero, Wolf, and Cove parts are available by calling the Factory Certified Parts Distributor in your area. Only filters and cleaners are available for online purchase in the Sub-Zero, Wolf, and Cove Store. Other parts are not available for purchase online. Use Locator to find the Parts Distributor for your area.

See also:

Refer to the Product Installation Guide for further installation information. Contact a Local Dealer for further sales information.

Thank you for your request. A Customer Care representative will contact you.

An error occurred. We were unable to submit your request.

Related Questions

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

Call us at (800) 222-7820

Customer Care and Support