Topics:

• Stainless steel on Sub-Zero or Wolf rusted or pitted
• How to remove rust from stainless steel
• What causes rusting on stainless steel?
• Can sea salt water cause pitting or rusting on stainless steel?

Troubleshooting:

Stainless steel does not readily corrode, rust, or stain with water as ordinary steel does, but it is not stain-proof, especially with low oxygen, high salinity (salt water), or poor circulation in the environment.

If stainless steel is rusted or pitted:

1. Clean the affected area. For instructions, refer to Clean Stainless Steel and Platinum, Sub-Zero Use and Care Guide, or Wolf Use and Care Guide.
2. If cleaning does not remove the rust, then very carefully and lightly, with the grain of the stainless steel, use a fine-grain Emery Cloth or Green Scotch-Brite Scouring Pad to remove rust.
3. Polish the surface with stainless steel polish like Signature Polish.
4. If this does not resolve the issue, the corroded part may need to be replaced.
5. See also:
   • Stainless Steel Is Scratched
   • Black Stainless Steel
   • Clean Carbon Stainless Steel 

NOTE: For units exposed to salt water, especially in coastal or tropical areas, rust on parts over time may not be preventable. Care should be taken to prevent exposure to elements.

• If there is rust on the enamel oven cavity of a Wolf range or Wall Oven, the porcelain enamel is likely damaged, causing the metal underneath to rust.

  • Refer to Oven Porcelain Damage for more information.

  If these steps do not resolve the issue, no further troubleshooting advice is available. Contact a Factory Certified Parts Distributor to order parts, or contact Factory Certified Service to schedule an appointment for repair.

Additional Resources:

• Sub-Zero Shelves Rusting
• Rust on a Wolf Griddle
• Clean Electric and Induction Glass Cooktops