Skip to main content
E-mail This Answer

Sub-Zero 700 Series Panel Removal

Topics:

  • What are the steps to removing a 700 Series panel?
  • How to remove a door or drawer panel on a 700 Series unit
  • Change the custom panel on a 700 Series unit

Answer:

For main refrigerator/freezer door:

  1. Remove the molding trim from the hinge side of the unit.
  2. Remove magnetic caps on hinge side.
  3. Remove all hinge side screws.
  4. With door closed, push from handle side of panel to hinge side to disengage the brackets.
  5. Panel will then come off of the door.

For drawer units:

  1. Remove the molding trim from the bottom of drawer.
  2. Remove all screws on underside of drawer.
  3. With drawer open, push down on panel from the top.
  4. Panel will disengage from drawer and be removed.

 

Refer to the product Installation Guide for further installation information.

Related Questions

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820