Skip to main content

700 Series Error Code 40

Topics:

  • 700 Series shows 40
  • Error code 40 is shown on 700 Series
  • 700 40

Cause:

  • Excessive freezer compressor run

Troubleshooting:

  1. If temperatures are high and not likely a door ajar situation, contact Factory Certified Service.
  2. If temperatures are near normal:
    • Clean the Condenser.
    • Press and hold the door ajar alarm key for 15 seconds to clear the error code.
  3. Make sure the kickplate is not completely covered by custom toe kick or enclosed in custom cabinetry.
    • Even if unit has worked like this for years, it can cause issues including sealed system failure.
    • Refer to the Sub-Zero Design Guide for design specifications.

Answer:

If these steps do not resolve the issue, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820