Replace Sub-Zero Model 601RG with Model BI-36RG
Topics:
- Are the opening size and electrical location the same for model 601RG and Classic Series (BI) model BI-36RG?
- Are the water location and panels the same for model 601RG and model BI-36RG?
- Do panels transfer from an old unit to a new unit?
- Can old panels go on a new unit?
- 601RG compatibility
Answer:
Planning
Opening Height | Electrical Requirements | Water Requirements | Items to Verify |
---|---|---|---|
Requires an additional 11" of height for the new model. | The existing electrical location for the 601RG is in a different location than suggested for model BI-36RG. | No change. | The new model door clearance fits if installed near an island. See the Sub-Zero Design Guide for details. |
Panels
- Panels from the 601RG will not fit the model BI-36RG. The 601RG panel is too short and narrow.
- Side panels are different and cannot be reused.
See also:
Refer to the Sub-Zero Design Guide for design specifications and the product Installation Guide for further installation information.
DID THIS ANSWER YOUR QUESTION?
We're standing by with answers
Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.
Call us at (800) 222-7820