Skip to main content

Sub-Zero Drain Pan Removal for ​601, 501, and 201 Models

Topics:

  • How is the drain pan removed for 601, 501, and 201 models?
  • Are drawings, pictures available for drain pan removal?
  • Install drain pan for 601, 501, and 201 models
  • Remove and install kickplate
  • Where is the drip pan on a Sub-Zero?
  • Black bar in front of drain pan preventing removal

Answer:

For combination refrigerator and freezer models, instead refer to:

For All Refrigerator and All Freezer models, to remove a drain pan:

1. Remove lower grille section.
2. Remove the kickplate by removing two screws at the bottom left and right corners and pulling forward.

3. Push the drain pan up and out from underneath. Drain pan may be difficult to remove due to tubing that is in front of the drain pan. Clean the drain pan out with a turkey baster if the pan is too difficult to remove.

4. To install, tilt the pan to set it back down into place.

See also:

Refer to the product Use and Care Guide for further information.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820