Vacuum Seal Drawer Installation Requirements
Topics:
- Vacuum Seal Drawer installation requirements
Answer:
The Vacuum Seal Drawer can be installed in a standard or flush inset application.
- Finish the edges of the opening. They may be visible when the drawer is open.
- For standard installations, the face trim overlaps stiles and rails. Refer to the chart below.
- For flush inset installations, a minimum 1/8" (3) reveal is required on all sides. Each corner of the opening must be exactly 90° for consistent reveals.
- An anti-tip block must be installed to prevent the Vacuum Seal Drawer from tipping forward when opened.
Installation Requirements | |
Base Support | Min |
Vacuum Seal Drawer | 75 lb (34 kg) |
Trim Overlap | |
Top | 0" (0) |
Bottom | 0" (0) |
Sides | 11/16" (18) |
Refer to the product Installation Guide for further installation information.
DID THIS ANSWER YOUR QUESTION?
We're standing by with answers
Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.
Call us at (800) 222-7820