Wolf E Series Oven Temperature Probe Use

Topics:

  • How to set temperature probe feature in a Next E Series Oven
  • What modes to use with temperature probe
  • Does oven door need to be shut to use probe?
  • Can two probes be used at the same time in a double oven?
  • Suggested internal temperature for food safety
  • What is the temperature probe range?

Answer:

Probe receptacle location:

To set the oven probe:

  1. Preheat the oven to the desired oven temperature in the desired mode.
    • Probe cannot be used with Broil, Proof, and Dehydrate.
    • Do not place a rack or accessory in rack position six when using the probe, as it interferes with probe removal.
  2. Completely insert the probe into the thickest area of the food.
    • When making bread, cook for approximately 10 minutes before inserting probe.
  3. When preheat is complete, place food in the oven.
  4. Insert the connector into the probe receptacle, then close the door.
  5. Touch PROBE on the touchscreen.
  6. Touch START/ENTER on the control panel to select the preset temperature.
    • To change the temperature, use the control panel to select the desired temperature, then touch START/ENTER.
  7. A chime indicates the temperature is 5°F (1°C) below the set temperature.
    • The oven chimes and the set temperature flashes when the internal temperature reaches the setpoint.
  8. Remove, the reinsert the probe to verify the internal temperature.
    • Pull straight down when removing the probe from the receptacle.
    • Bending or pulling the probe at an angle during removal may damage the probe and oven.
  9. Touch the flashing temperature to clear.
  10. See also:

Refer to the product Use and Care Guide for further information.

Genuine Sub-Zero, Wolf, and Cove parts are available by calling the Factory Certified Parts Distributor in your area. Only filters and cleaners are available for online purchase in the Sub-Zero, Wolf, and Cove Store. Other parts are not available for purchase online. Use Locator to find the Parts Distributor for your area.

Thank you for your request. A Customer Care representative will contact you.

An error occurred. We were unable to submit your request.

Related Questions

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

Call us at (800) 222-7820

Customer Care and Support