Skip to main content

Cove Dishwasher | HTR1 Has Been ON Too Long | Error 20 01 93

Topics:

  • Cove Dishwasher error code 200193
  • DW24 shows EC 200193
  • 20 01 93
  • HTR1 has been ON too long

Cause:

  • HTR1 has been ON too long
  • Water did not heat to temperature for cycle in set time

Troubleshooting:

  1. Turn the home circuit breaker to the unit off for 30 seconds then back on again.
  2. Retest the unit operation.
  3. Verify the water supply line to the unit is insulated if on an outside wall or in very cold conditions.
    • If the water line is very cold it may take too long for the water to heat to temperature for some higher temperature cycles (for example, Soak & Scrub), causing error 200193.

Answer:

If these steps do not resolve the issue, no further customer troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820