Skip to main content

Cove Dishwasher | "Clean Filter" Message Notifies The User That The Sump Filtration System Needs To Be Cleaned | Error 30 01 14

Topics:

  • Cove Dishwasher error code 300114
  • DW24 shows EC 300114
  • 30 01 14
  • Clean Filter message on DW24 display
  • "Clean Filter" message notifies the user that the sump filtration system needs to be cleaned

Cause:

  • Sump filtration system needs to be cleaned
  • "Clean Filter" message notifies the user that the sump filtration system needs to be cleaned

Troubleshooting:

  1. Clean the sump filter. Refer to Cove Dishwasher Filter Removal and Cleaning for instructions.
  2. Turn the home circuit breaker to the unit off for 30 seconds then back on again.
  3. Retest the unit operation.

Clean the filter often. Heavy use may require more frequent cleaning.

  • “Clean Filter” appears on the display after 30 cycles.
  • This is a reminder and is not based on the soil level of the filter.

Refer to the product Use and Care Guide for further information.

Answer:

If these steps do not resolve the issue, no further customer troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820