Skip to main content

Cove Dishwasher | PE1: Pressure Sensor Detected An Overfill Fault During Inactive Wash Cycle | Error 70 01 66

Topics:

  • Cove Dishwasher error code 700166
  • DW24 shows EC 700166
  • 70 01 66
  • Overfill detected message on DW24 display
  • PE1: pressure sensor detected an overfill fault during inactive wash cycle

Cause:

  • PE1: pressure sensor detected an overfill fault during inactive wash cycle

Troubleshooting:

  1. Verify the water supply is turned on.
  2. Verify the drain line is not kinked.
  3. Turn the home circuit breaker to the unit off for 30 seconds then back on again.
  4. Retest the unit operation.
  5. Touch CANCEL to reset.
  6. If it reappears, contact service.

Answer:

If these steps do not resolve the issue, no further customer troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Related Questions 

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820