Topics:

• Cove Dishwasher stainless steel upper and lower front panel 
• Part number 827622, 828373
• How to remove the panels behind the kickplate

Answer:

To remove the front covers on a Cove Dishwasher:

1. Pull the kickplate forward off of the unit.
2.  Open the door.
3.  Remove the outer door panel screws.
4.  Close the door halfway.
5.  Pull the door panel up and out of the keyhole slots.
6.  Close the door.
7.  Remove the screws from the lower front cover.
8.  Rotate the lower front cover forward, and remove it from the unit.
9.  Remove the screws from the upper front cover.
10.  Pull the upper front cover away from the unit.
11.  Remove the wire harness retention clip from the upper front cover.
12.  Remove the upper front cover from the unit.

When installing the front covers, note that:

• For the top front cover, make sure to clip the wire harness retention clip onto the cover.
• For the bottom front cover, place the cover's bottom tab behind the flange on the base bottom. Make sure the air drier duct is sitting on top of the tab on the lower front cover.

See also:

• Cove Dishwasher Custom Door Panel Mounting
• Cove Dishwasher Stainless Steel Door Panel

Refer to the product Installation Guide for further installation information.