Skip to main content

Dishwasher Air Gap Device

Topics:

  • Is an air gap device required for dishwasher installation?
  • When to use air gap device
  • How and where to install air gap device

Answer:

An air gap device is a small pipe that sticks up off the kitchen sink, typically 4-5 inches. It prevents sink drain water from backing up into the dishwasher, possibly contaminating dishes.

  • An air gap device is not used in all dishwasher installations and is not provided with the Cove Dishwasher.
  • Air gap requirements vary by state. For example, Wisconsin requires an air gap above or below the sink.
    • The air gap device is usually in the rear left or right corner of the sink.
    • Air gaps installed above the sink can be checked for clogs by removing the cap and checking the screen underneath.
    • Refer to the product Installation Guide for further installation information.
  • Regularly clean the dishwasher and keep the dishwasher filters clean.
  • Dirty filters lead to the air gap becoming clogged.
  • To clean an air gap, remove the cover and check for blocked hoses.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820