Topics:

• Take out upper evaporator fan from next Designer Series refrigerator
• Remove Designer Series Column upper evaporator fan from refrigerator

Answer:

Tools required:

• T-20 Torx bit
• Wire cutter

Instructions:

1. Disconnect the product from the power source.
   
2. Open the door and remove any cantilever shelves that will interfere with the procedure.
3. Push the light panel toward the rear of the unit, and lower the front of the light panel. Release the light panel wires from the wire clips and disconnect the light panel wire connector. Remove the light panel from the unit.
4. Remove the top drawer.
5. Remove the fixed glass shelf.
6. Remove the refrigerator baffle
7. Remove the upper air duct screws and rivet. Remove the upper air duct. 
8. Remove the upper evaporator fan assembly mounting screws. Pull the upper evaporator fan assembly forward. Release the evaporator fan wires from the retaining clip, and disconnect the fan from the unit wire harness. Remove the upper evaporator fan assembly from the unit.
9. Cut the wire tie holding the evaporator fan wires to the shroud.
10. Remove the fan blade and rear retainer.
11. Remove the evaporator fan from the shroud.