Skip to main content

Sub-Zero Classic Series (BI) French Door Model Door Alignment and Leveling

Topics:

  • Classic Series (BI) French door model (UFD) leveling and door adjustment procedures
  • Can door adjustment be affected by a warm or cold unit?
  • BI-UFD Series doors do not align, doors are uneven
  • BI Series French door model door adjustment procedure
  • One door on a Classic French door model sticks out further than the other

Answer:

The doors of a Classic Series (BI) French door unit can be adjusted in and out, and side to side tilt.

To make adjustments, slightly loosen the two upper hinge bolts on the upper hinge plate using a 1/2" wrench and:

In-and-out adjustment

  • For the left-hinge door, using a 5/32" Allen wrench, turn the adjustment bolt clockwise to bring the handle side of the door inward, and counterclockwise to move the handle side outward.
  • Reverse directions for the right-hinge door.

Side-to-side tilt adjustment

  • For the left-hinge door, using a 3/8" wrench, turn the adjustment bolt clockwise to raise the handle side of the door, and counterclockwise to lower the handle side.
  • Reverse directions for the right-hinge door.

French door models cannot be adjusted up and down.

If these steps do not resolve the issue, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820