Topics:

• Are there accessory panels for the 200/300, 500, and 600 Series units
• Install side panels on 200/300, 500, and 600 Series and model 430 Wine Storage unit
• Panel part numbers 7007490, 7007491, 7007492, 7007493
• Instruction sheet 3754180
• Does a side panel increase the opening width for a product?
• Can you reuse side panels?

Answer:

Stainless steel and white enamel side panels Side Panel Installation Instructions detail the installation process.

• Available for the 200/300, 500, and 600 Series and model 430 units.
• The stainless steel panel matches the stainless steel used on all Sub-Zero and Wolf products. It is type 304 stainless with a number 4 brushed finish.
• Side panels work on either right or left side of any compatible unit.
• Side panels from 200/300 or 500 Series models will fit onto a new similar size 500 or 600 Series model.
• The Classic (formerly Built-In) (BI) Series side panels are not compatible with older model side panels. The attachment is different.
• Existing side panels are not reusable on Classic models.
• Use of a side panel increases the product opening width needed by 1/4" per side panel. For a 36" unit with two side panels, the opening width needed would be 36" instead of the typical 35-1/2" wide.
• When using custom side panels, the opening width will increase based upon the thickness of the side panel.
• Refer to the product Installation Guide for custom side panel dimensions.
• Mounting screws for a custom panel must be longer than the thickness of the panel. 1/2" longer is recommended.