Skip to main content
E-mail This Answer

Replace Sub-Zero Model 690 with Classic Series Model CL4850SD or CL4850SID

Topics:

  • Are the opening size and electrical requirements the same for model 690 and Classic Series (CL) model CL4850SD or CL4850SID?
  • Are the water location and panels the same for model 690 and model CL4850SD or CL4850SID?
  • Do panels transfer from an old unit to a new unit?
  • Can old panels go on a new unit?
  • 690 compatibility

Answer:

Planning

Opening Size

Electrical Requirements

Water Requirements

Items to Verify
  • No change.
  • No change.
  • No change.
  • There is no reduced height or extended height grille available for model CL4850SD or CL4850SID.
  • A new grille panel will be needed if a reduced height or extended height grille was used on model 690.
  • Whether the new model door clearance fits if installed near an island. See the Sub-Zero Design Guide for details.

Panels

  • The panels from model 690 will not fit model CL4850SD or CL4850SID because the water and ice dispensers are in a different location.
  • Side panels are different and cannot be reused.

Refer to the Sub-Zero Design Guide for design specifications and the product Installation Guide for further installation information.

Related Questions

Results per page
    Results 1-8 of 1,771

    DID THIS ANSWER YOUR QUESTION?

    Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

    Ask Your Question

    We're standing by with answers

    Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

     

    Call us at (800) 222-7820