Skip to main content

Replace Sub-Zero Model 611G with Model BI-30UG

Topics:

  • Are the opening size and electrical location the same for model 611G and Classic Series (BI) model BI-30UG?
  • Are the water location and panels the same for model 611G and model BI-30UG?
  • Do panels transfer from an old unit to a new unit?
  • Can old panels go on a new unit?
  • 611G compatibility

Answer:

 

Planning

Opening SizeElectrical RequirementsWater RequirementsItems to Verify
  • No change.
  • No change.
  • No change.
  • Whether the original unit had a reduced height grille (to reduce overall unit height to 83") or an extended grille (to increase overall height above 84"). If so, order a new reduced height or extended height grille for the new model. See Classic Series (BI) Grille Height Options.
  • Whether the new model door clearance fits if installed near an island. See the Sub-Zero Design Guide for details.

Panels

  • The panels from model 611G will not fit model BI-30UG. New panels must be made.​
  • Side panels cannot be reused.

See also:

Refer to the Sub-Zero Design Guide for design specifications and the product Installation Guide for further installation information.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Related Questions 

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820