Skip to main content

Designer (IT, IC, ID) Drawer Divider Removal

Topics:

  • Designer (IT, IC, ID) drawer dividers
  • How to remove the drawer dividers
  • Drawer divider removal

Troubleshooting:

To reposition a drawer divider:

  1. To remove a short divider, flex the long divider slightly, then pull upward.
  2. To remove a long divider, all short dividers must be removed.
  3. Pull the long divider up until it stops, rotate counterclockwise, then pull upward.
  4. To install a long divider, align the grooves with the drawer tabs, rotate clockwise, then slide down.
  5. To install a short divider, position as desired, then slide down.

Refer to the product Use and Care Guide for further information.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Related Questions 

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820