Skip to main content

Designer Series Ice Maker


  • Designer (Formerly Integrated) ice maker


  1. To turn on the ice maker, touch on the options screen. A single highlighted cube indicates the ice maker is active. Three highlighted cubes indicate the Max Ice feature is active.
  2. To turn off the ice maker, touch until no cubes are highlighted.
  3. After initial start-up, discard the first few batches of ice. The ice may contain impurities from new plumbing connections.



Max Ice increases ice production up to 30% for a 24-hour period. During that period, some components may run at a higher speed resulting in a unique audible tone. This is typical and will revert back after 24 hours or when the ice bin is full.

If ice is not used regularly, it may fuse together. To avoid, discard ice and allow ice maker to replenish.

Turn off the ice maker if the ice bin is removed for an extended period. The unit has a 3-minute delay after the ice bin is removed. Verify the cubes are not ejected before the ice maker is turned off or the ice bin is installed.

Refer to the product use and care guide for further information.


Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.


Call us at (800) 222-7820