Skip to main content

PRO Refrigeration Drawer Adjustment

Topics:

  • PRO Refrigeration drawer adjustment
  • How to adjust the pull-out drawers on a PRO3650 and PRO4850
  • PRO series drawer adjustment up-and-down, side-to-side, and tilt
  • PRO Refrigeration drawer squeaks

Answer:

Up-and-Down Adjustment

  1. Use a hex wrench to turn the up-and-down adjustment screw counterclockwise to raise, and clockwise to lower.
  2. Refer to the illustration below.

Side-to-Side Adjustment

  1. Use a hex wrench to turn the adjustment screw.
  2. Refer to the illustration below.
  3. Both drawer slides must be adjusted equally to achieve movement.
    • For example, if the right slide adjustment screw rotated clockwise, rotate the left slide screw equally counterclockwise.
    • The drawer will squeak if the adjustments are not done equally on both sides.

Tilt Adjustment

  1. Loosen the side and the bottom, center screws. Refer to the illustration below.
  2. Remove the screw from the corner of the drawer that is out of adjustment.
  3. Move the drawer front in or out by hand.
  4. Install the screw into the bottom of the drawer. Each hole location adjusts the door in or out by 1/32" (1).
  5. Tighten the side and bottom, center screws.

Refer to the product Installation Guide for further installation information.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Related Questions 

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820