Skip to main content

Replace M Series Single Oven with E Series Single Oven


  • What E Series Single Oven is recommended to replace an M Series Oven?
  • Is the Next E Series Single Oven a direct replacement for the M Series models?
  • Installation differences between the M and E Series Ovens
  • What changes have to be made when replacing an M Series Oven with a Next E Series Oven?
  • What are the differences in opening depth, width, and height for the M Series versus the E Series?


Refer to the following chart for compatible replacement for M Series Oven options to E Series.

  • The following chart is regarding general compatibility only and does not take into consideration differences in installation requirements, interior or exterior dimensions, or interior capacity.
M SeriesE SeriesStandard InstallationFlush Inset InstallationElectrical
SO30CM/BNo Direct ReplacementOpening Depth
  • No change
  • Stays the same at 23-1/4".
Opening Width
  • No change
  • Stays the same at 28-1/2".
Opening Height
  • No change
  • Stays the same at 27-1/2".
  • Overall height is the same at 28-1/2".
Opening Depth
  • Cleat change for Contemporary M Series
  • Stays the same at 24”.
  • The cleat backset stays the same at 7/8” for Professional and Transitional M Series.
  • Contemporary M Series changes from 1" to 7/8".
Opening Width
  • Change required
  • Stays the same at 30 1/8".
  • The side cleats stay the same at 13/16”.
Opening Height
  • No change
  • Stays the same at 28 ¾”.
  • The top cleat stays the same at 1 1/8".
  • The bottom cleat stays the same at 1/8".
Electrical supply requirements stay the same: 240/208 V AC, 60 Hz, 30 amp circuit.
  • Dependent on location of the original electrical supply outlet, it may or may not need to be moved to accommodate the new unit.
  • A 4' conduit supplied with the unit stays the same.

Refer to the Wolf Design Guide for additional design specifications.

Contact a Local Dealer for further sales information.


Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.


Call us at (800) 222-7820