Skip to main content


Wolf Dual Fuel (DF3050, DF3650, DF4850, DF6050) and Induction Range (IR3050, IR3650, IR3051, IR3651, IR4851) Oven Door Alignment

Topics:

  • Dual Fuel (DF3050, DF3650, DF4850, DF6050) Oven door alignment
  • How to adjust the Induction Range (IR3050, IR3650, IR3051, IR3651, IR4851)
  • Can the Induction Range Oven door be adjusted?

Answer:

The alignment of the Dual Fuel and Induction Range Oven doors can be adjusted once the unit is installed.

To adjust the door:

  1. Remove the skirt by extracting the screws.
  2. Open the door, and loosen the nut. Refer to the illustration below.
  3. Close the door, and turn the screw clockwise to raise and counterclockwise to lower the door.
  4. Open the door, and tighten the nut.
  5. Close the door, and reinstall the skirt.

Refer to the product Installation Guide for further installation information.

Related Questions

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820