Steamer Module IS15 Drain Operation
Topics:
- How is the water drained out of the IS15 steamer?
- How is the automatic drain operated on model IS15?
- Does the steamer drain automatically close by itself?
- Does the Steamer Module need to be connected to a drain line?
- Can a bucket drain the water out of the IS15 steam module?
Answer:
The automatic drain can only be operated while the unit is in Idle mode, unlocked, and not turned on.
- To open the drain, press and hold Drain for 3 seconds. After this delay, the drain will stay open for 2 minutes and then close.
- To close the drain before the 2 minutes, touch Drain and it will close immediately.
- If the temperature of the liquid is above 140°F, HOT will show and the display will flash three times. Wait for temperature to cool below 140°F to drain.
- For further info, refer to Steamer Module (IS15) Use and Care Guide.
The drain connects to a physical drain line connection, or use a bucket under the unit.
Consult a plumber for connecting the unit to a home drain line.
If a bucket is used, it must be at least a 2.5-gallon heat-resistant bucket. Wolf recommends lockable cabinet doors.
For further info, refer to Steamer Module (IS15) Installation Guide.
![](/content/dam/subzeroandwolfprogram/userfiles/image/Steamer%20Drain.png)
See also, Steamer Module Will Not Drain.
DID THIS ANSWER YOUR QUESTION?
![](/content/dam/subzeroandwolfprogram/media/answers/frame_customerservice.jpg)
We're standing by with answers
Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.
Call us at (800) 222-7820