Skip to main content

Vacuum Seal Drawer Does Not Operate

Topics:

  • Vacuum Seal Drawer does not operate
  • Vacuum Seal Drawer does not turn on, will not start
  • VS24 cooldown

Troubleshooting:

  1. Verify power is on.
  2. Verify electrical power to the unit and home circuit breaker is on.
  3. Allow unit to cool for 2 minutes after every vacuum cycle.
  4. Allow unit to cool for 1 hour after every pump dehumidification cycle.
  5. If these troubleshooting steps do not resolve the issue, service is necessary to expertly diagnose and repair the product. Contact Factory Certified Service to schedule an appointment for repair.

Answer:

Refer to the product Use and Care Guide for further information.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820