Skip to main content
E-mail This Answer

Warming Drawer Series Error Code 60

Topics:

  • Warming Drawer appears 60 on panel
  • WWD30 60
  • Warming Drawer error code 60
  • Warming Drawer has stuck relay
  • Err60, Err 60 shows on Warming Drawer control display

Cause:

  • Warming Drawer temperature rises to 250ºF in any mode/state

Troubleshooting:

  1. Verify ambient temperature is not extremely hot. When installed outdoors, direct sunlight may cause this error code to appear.
  2. Verify proper product installation. Refer to the product Installation Guide for further installation information.
  3. Turn the home circuit breaker to the unit off for 30 seconds then back on again. Retest the unit operation.
  4. If these steps do not resolve the issue, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair. 

Related Questions

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820