Skip to main content

Sub-Zero Classic Series (BI) Installation Hardware


  • Missing parts for installation for Classic (BI) model
  • Cannot find parts needed for installation on BI unit
  • Install kit location


Classic series (BI) units come with the following installation hardware.

  • Use the part numbers listed below if needing to order a missing component.
  • The Classic series custom front panel mounting kit is a sales accessory, and does not come standard with the unit.
  • (6) anchoring screws ship with Classic products.
  • The installation kit is found in the bag with the use and care and installation guides.

Contact a Factory Certified Parts Distributor to order parts.

Installation Kit NamePart #
Water Valve Fitting Package3520490
90 Degree Door Stop7005865
Anti-tip, all models7009311
Dispenser Glasswell Cover screws6201640
Custom Front Panel Mounting Kit Hardware7020607
Anchoring Screws, #8 - 32 x 3/4 6 lobe Torx head*7004226*







*PN 7004226 is not available as a separate part. Order the anti-tip kit 7009311, if new screws are needed.


Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.


Call us at (800) 222-7820