Topics:

• Remove Convection Steam Oven (CSO) door
• Tools needed to remove a door on a CSO
• CSO plumbed model door removal

Answer:

It is strongly recommended to have Factory Certified Service remove an oven door. Performance may be affected if door is not properly installed.

• Tools are not required for door removal.

Oven Door Removal:

1. Open the oven door completely.
2. Pull both hinge latches forward and down to rotate into the open position. 
3. Close the door to the at-rest position, then lift up and out.  
   • On handleless models, press and hold .

Oven Door installation:

1. Insert door hinges into the frame openings.
2. Open the oven door completely.
3. Push both hinge latches back to rotate into the closed position. 

Additional Resources:

• Legacy Convection Steam Oven Door Removal
• For other models, see Oven Door Removal.
• If a replacement door is needed, contact a Factory Certified Parts Distributor to order parts. 
• Refer to the product Installation Guide for further information.