Skip to main content
E-mail This Answer

Classic Series (CL) Freezer Drawer and Ice Bin Installation and Removal

Topics:

  • How to install ice bucket in a Classic (CL) model
  • Ice bin crooked or not sliding all the way back
  • Remove freezer drawer
  • Classic ice bin removal

Answer:

Over-Under Models

To remove and replace the ice bin:

  1. Pull the freezer drawer out to full extension.
  2. Lift the ice bin up and out.
  3. Reverse this procedure to replace the bin.

To remove the freezer upper drawer:

  1. Pull the freezer drawer out to full extension.
  2. Lift the front of the freezer upper drawer.
  3. Push both drawer slides back into the freezer.
  4. Remove the freezer upper drawer from the unit.

Side by Side Models

  1. Pull the drawer open until it stops.
  2. Pull the two plastic tabs located behind the bottom two corners of the drawer forward, then lift up and out. 

If the door opening is limited to 90°, the top drawer must be removed before removing the middle or lower drawer.

To Install:

  1. Push the drawer slides in.
  2. Align the drawer with the slides and push back until it stops.
  3. Press down on the front of the drawer to engage the slides.

Related Questions

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820