Topics:

• Why does the Side Burner (SB13) light not work, turn on, turn off?
• The SB13 light does not, will not turn on, will not turn off.
• SB13 LED indicator light won't illuminate.

Troubleshooting:

The Side Burner Module (SB13) does not have an individual light switch. The light is controlled by the attached Outdoor Grill (OG) light control. Check the following if the lights do not work properly:

1. If lights do not turn on, ensure power is supplied to the unit.
2. Ensure nothing is preventing the OG hood switch from being released when the hood is opened.
   • The hood switch is near the front right of the grill's surface; the hood presses against the switch when it is closed and releases the switch when it is opened.
3. If unit is a new installation and installed in a built-in application, verify that the hood switch is present. It is possible that the hood switch rod or bracket was knocked out of alignment during installation.
4. Pop the rod back into place.
5. If lights do not turn off, ensure the push style power switch is being firmly & fully pressed.
6. Ensure nothing is preventing the OG hood switch from being depressed when the hood is closed.
   • The hood switch is near the front right of the grill's surface; the hood presses against the switch when it is closed.
7. If unit is a new installation and installed in a built-in application, verify that the hood switch is present. It is possible that the hood switch rod or bracket was knocked out of alignment during installation.
8. Pop the rod back into place.
9. See also:
   • Outdoor Gas Grill, Burner Module & Side Burner Light Operation
   • Burner Module LED Light Troubleshooting
   • Outdoor Gas Grill Light Troubleshooting

Refer to the product installation guide for further information.

Answer:

If these steps do not resolve the issue, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.