Skip to main content

400, 500, 600, 700 Series, UW-24, and IC-27 Dual Installation Heater

Topics:

  • Installation instructions for part number 7007529, 7007530, 7013769, 7013770, 7030447
  • Instruction sheet 3755160
  • List of components included with dual installation kit part number 7007529, 7007530, 7013769, 7013770, 7030447
  • How to install the dual heater kit on a 400, 500, 600, 700, UW-24, IC-27 Series unit
  • Z-shaped bracket to install a 700 next to a 736, part number 7006501
  • Is a dual installation heater required for two Wine Storage units installed next to each other
  • What is the purpose of a heater between two refrigeration units?

Answer:

The dual heater kit is used to prevent moisture and condensation, which potentially causes damage to the units or cabinetry, from forming between units.

  • Dual Heater Kit Installation Instructions for 500, 600, 700 and IC-27 Series detail the installation process.
  • Models 427 and 427R are not called out in the instructions. They are considered Designer Tall units and use the same instructions.
  • 424 models starting with serial # 3227000 and UW-24 models use dual installation kit # 7030447.
  • Refer to UC Undercounter Dual Installation Kit for instructions and more information.
  • Anytime two 400, 500, 600, 700, or IC-27 Series products are installed next to each other, or with less than a 2" separation, a dual installation heater kit must be installed.
  • Part of the heater wraps onto the top of a 601R or 601F because of the height, but should still be used in dual installation applications.
  • Even if a panel or filler is placed between the two units, a dual installation heater kit must still be used.
  • Dual installation kits will include multiple harnesses and brackets for different installations. Sub-Zero recommends a Factory Certified Installer for proper installation.
  • Dual installation kits are sales accessories, which must be purchased separately from the unit; contact a Local Dealer for further sales information.
  • The Z-shaped bracket used to install a 700 next to a 736 is part number 7006501 if this is needed separate from the kit.
  • See also:
  • Use the table below to determine which dual installation kit to purchase:
Installation Heater Kit Part #
Installing 2 - 700TC, 700TR, 700TF, 736, 427, 427R, or 430 side by side.
Also for all 500 and 600 Series side-by-side installations.
7007529
Installing 2 Base Units - 424 PTS# 3227000, 700BR, 700BF, or 700BC side by side.
Or 1 Base and 1 Tall Unit side by side.
7007530
Installing 2 - IC-27's side by side.
7013769
Installing an IC-27 next to a 700 Tall Unit side by side.7013770

Contact a Factory Certified Parts Distributor to order parts.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820