Skip to main content

Dual Installation of Undercounter, Designer Drawer (ID), 700 Series, UW-24, and 424 Models

Topics:

  • Is a dual installation heater kit needed to install two Undercounter (UC-15I, UC-24, 424, 315W, UW-24) units next to each other?
  • How close can an UC-15I be to a UC-24?
  • Can a 700BR, 700BF, 700BC be installed next to a 424G Undercounter Wine Storage unit?
  • When installing two model 424 units next to each other is a dual installation kit needed?
  • Can an ID Designer Drawer be installed next to a UC Undercounter unit?

Answer:

A dual installation kit is used for some undercounter-size Sub-Zero products.

UC-24 and UW-24 Undercounter Models

UC-15I Ice Maker

700 Series Base Models

  • Two 700 Base units or a 700 Base unit next to a 424G with less than 2" between units:

Designer Drawer (ID) Units

  • Order dual installation kit part number 7024476 for drawer to drawer installations.
  • The heater panel has two black wires.
  • Drawer units have a separate green (ground) wire that clips to the unit and heater panel.
  • For units prior to serial number 5522420, also order jumper harness 7031724.
  • The jumper harness connects the unit to the heater.
  • The center trim will not cover the louvered area behind the lower drawer.

ID Drawer to 700 Series Base Units

  • Either installation kit can be used.
  • The installation kit needed depends on which unit is on which side.
  • This will always be the right-hand side unit when facing the opening.

ID Drawer to UC Undercounter Units

  • Either installation kit can be used.
  • The installation kit needed depends on which unit is on which side.
  • This will always be the right-hand side unit when facing the opening.
  • The brackets for securing the units together will not work. Brackets specific to this installation are not available.

424 Wine Storage

  • For 424G dual installations, the opening depth needed to install a 700 Series Base unit next to a 424 Wine Storage unit is 25".
  • Pull the 424 Wine Storage unit forward in the opening to match the front of the 700 Series Base model.
  • If the 424 door hinge is on the same side as where the two units join, binding may occur past a 90° door opening.
  • If the units are installed with less than 2" between them, the 700 Series dual heater kit is recommended.
  • Double the opening width when installing two 424 models next to each other.
ModelInstalled Next to ModelDual Installation Kit Required
UC-15I Ice MakerAny other modelNo
700 Base ModelAny 700, Designer, Classic, or Wine Storage modelIf units are less than 2" apart
ID Designer DrawerAny 700, Designer, Classic, or Wine Storage modelIf units are less than 2" apart
424 Wine Storage424 prior to serial number 3227000No
424 Wine Storage424 starting with serial number 3227000If units are less than 2" apart
424 Wine StorageAny other modelIf units are less than 2" apart
UW-24 Wine StorageAny other modelIf units are less than 2" apart

Refer to the product Installation Guide for further installation information. Refer to the Sub-Zero Design Guide for additional design specifications.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820