Pro Ventilation Hood Light Bulbs and Heat Lamps

If Pro Ventilation Hood lights do not work:

1. Verify that power is supplied to the hood.
2. Replace the bulbs.
   • Light bulbs are available for purchase at local hardware stores or through an authorized Factory Certified Parts Distributor. See below for a complete list of bulb types.
   • Heat lamps must be purchased separately.
   • Light bulbs are not available for purchase from the Sub-Zero, Wolf, and Cove website.
   • Wear gloves for safety when replacing light bulbs.

Tips:

• Standard bulbs for task lighting are shipped with the unit.
• Touching halogen bulbs with bare hands can cause them to burn out quickly.
• Bulbs with lower wattage may be used but will not be as bright.
• Using a bulb with a larger wattage than listed is not suggested since the hood is not rated for higher wattage.
• Standard bulbs are incandescent or halogen.
• Wolf does not recommend replacing lights with LED bulbs.

If these steps do not resolve the issue, no further troubleshooting advice is available. Contact Factory Certified Service to schedule an appointment for repair.

To determine which Pro Hood model you have, see the model number on the serial tag. Wolf Serial Tag Location Guide provides serial tag or product rating plate location for current production models.

* Bulb is incandescent. If LED bulbs are used, they may only work on the high light setting. For this reason, Wolf does not suggest use of CFL or LED lights on models that did not come with them.

**All 27" deep hoods also have receptacles for two heat lamp bulbs. Refer to Pro Hood Heat Lamps for more information.

Genuine Sub-Zero, Wolf, and Cove parts are available by calling the Factory Certified Parts Distributor in your area. Only filters and cleaners are available for online purchase in the Sub-Zero, Wolf, and Cove Store. Other parts are not available for purchase online. Use Locator to find the Parts Distributor for your area.