Skip to main content

Designer Column (DEC) Freezer Ice Maker Removal

Topics:

  • Take out ice maker from next Designer Series Refrigerator
  • Remove Designer Series Column ice maker from freezer

Answer:

Tools required:

  • T-20 Torx bit

Instructions:

  1. Disconnect the product from the power source.
  2. Open the door, and remove any door shelves that may interfere with the procedure.
  3. Remove the upper freezer basket, including the ice bin.
  4. Remove the fixed glass shelf.
  5. Loosen, but do not remove, the ice maker mounting screws.
  6. Pull the ice maker upward and out of its T-shaped slot.
  7. Pull the ice maker away from the rear air duct.
  8. Disconnect the ice maker wire harness from the unit wire harness.
  9. Remove the ice maker from the unit.

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820