Topics:

• Take out shelf ladder from next Designer Series Refrigerator
• Remove Designer Series Column shelf support

Answer:

Tools required:

• T-20 Torx bit

Instructions:

1. Disconnect the product from the power source.
2. Open the door and remove any cantilever shelves that will interfere with the procedure.
3. Push the light panel toward the rear of the unit, and lower the front of the light panel.
4. Release the light panel wires from the wire clips and disconnect the light panel wire connector.
5. Remove the light panel from the unit.
6. Remove the top drawer.
7. Remove the fixed glass shelf.
8. Remove the refrigerator baffle
9. Remove the upper air duct screws and rivet.
10. Remove the upper air duct. 
11. Remove the shelf ladder mounting screws. The top screw also holds the wire connector.
12. Remove the shelf ladder from the unit.