Skip to main content
E-mail This Answer

Replace Sub-Zero Model 251 with Classic Series Model BI-36U

Topics:

  • Are the panels, opening size, electrical requirements, and water location the same for model 251 and Classic Series (BI) model BI-36U?
  • Will panels transfer from an old unit to a new unit?
  • 251 compatibility
  • Can panels be reused on a new unit?

Answer:

Planning

Opening SizeElectrical RequirementsWater RequirementsItems to Verify

No change.

The existing electrical location for the 251 is in a different location than suggested for model BI-36U.

No change.

Verify door clearance for units installed near an island.

Panels

The panels from model 251 will fit model BI-36U with the purchase of a retrofit kit, grille, and handle.

  • Retrofit kit, part number 7005229.
  • Louvered grille, part number 7014850.
  • Framed handle set, part number 7014889 (or an extended handle set, part# 7003464).
  • Refrigerator panel must be reduced by 3/8" height.
  • A new reduced height or extended grille will be needed, if used. See Classic Series (BI) Grille Height Options.
  • Side panels cannot be reused.

BI-36U Sales Accessories

See also 200 and 300 Series Planning Information for product dimensions.

Refer to the Sub-Zero Design Guide for design specifications and the product Installation Guide for further installation information.

Related Questions

DID THIS ANSWER YOUR QUESTION?

Need further assistance? Contact Customer Care at 800.222.7820 or provide your information below and request a Customer Care representative contact you.

Ask Your Question

We're standing by with answers

Whether you're shopping for appliances or have questions about those you already own, we've got the resources you need. Talk directly to a customer care expert at the Sub-Zero, Wolf, and Cove service center, or connect with an appliance consultant at an official showroom near you. Get quick answers online, or reach a certified service provider or installer. And much more.

 

Call us at (800) 222-7820